Foils, liners, linings. You will notice in (almost) all the pictures of (our) pools that the interior is blue. And does it have to be that way? The answer is -NO, of course. Is it a trend, a fashion or simply a habit? Customers most often opt for Adria Blue Renolitalkorplan paint. There are many more variations on the theme of color and design, you can see on our website or on the IG story highlights available colors. In the end, everything was done so that the client could more easily match the color of the pool walls with the yard decoration and even the color of the building.
One common day in the world of "Poolgays", especially during the spring season. Some say pre-seasons. How does anyone watch. It is not sunny weather. Again, an impact that we cannot ignore, but still for us the season is throughout the year. In accordance with that, we try to organize our time so that all works are started and completed on time for the mutual benefit of the client and us as a company.
The look that the 9x4m pool got after the installation of the white curbstone. The difference between SA and BEZ is absolutely visible, but what is also an important item? Safety comes first! No, we don't just mean the hygienic correctness of the water! It is important that the pool environment is important for users who come out (wet) from the water in terms of using materials that do not slip when touched. In this way, falls and injuries would be avoided. A rarely mentioned but often very important thing when choosing a material!
This time we will definitely remember at a very different price from the previous ones. The situation we have been in for a few weeks has made many people think about many things, about themselves, health and going to nature. Going to nature means that famous "escape from the city". Greenery, trees, grassy areas and shrubs, all this associates us with a long time ago, when we were aware of the natural environment to which we belonged since ancient times. But, with age and other trends, it was lost somewhere and put aside. ..This situation has shaken us all in many ways, and whether we will learn a lesson or not ... it is up to us ... We wish everyone a nice weekend and enjoyment wherever they are! HAPPY HOLIDAY AND HEALTH!
The recommended measures for pool users are nothing special in a pandemic than usual, but let's mention that. The tips were suggested by the supplier, who is mentioned at the bottom of the site, to be safe from bacteria and viruses (Covid 19 and others). during the season: 1. maintain the pH balance of water (between 7.2-7.6) and chlorine (0.5-1) 2. measure these values twice a week manually if you are not a user of automation for water maintenance (pH and ei Expert) 3. if necessary -dose chemistry to achieve the above value 4. maintain the hygiene of the pool (skimmer, wall / floor surface ..) as well as the environment of the pool 5. maintain body hygiene (shower before and after bathing), as well as washing towels and bathing clothes . These are, of course, the basics of the necessary hygiene when using the pool. Nothing new is stated, but it is important to note things in order to pay special attention to each of these "steps" in order to safely and healthily use the pool and preserve the health of the whole family. .
In order to provide all interested clients with the necessary information and treatment, while maintaining our efficiency and economy, which concerns both us and the client, we decided to present to you the way the company operates in terms of sales / construction of swimming pools: 1. Initial conversation - the first conversation in which we define some basic needs for the pool and equipment. Before the meeting, the client should be familiar with the available space for the pool and the area of your yard 2. Meeting in our company-office. We arrange an appointment for you to visit us at our address in order to introduce you to our range and services. At this meeting we would define your requirements, needs and actual construction. 3. Going to our location where you would see live on the example of a built pool how all the equipment works and for what purpose 4. After this we make an offer that contains the agreed equipment and services. *** if at the meeting and after the presented information we determine that the terrain is an exception and that it is specific (type-filled terrain, under a huge slope, near certain facilities, etc.) then we go to the location and determine the "condition" and possibility of construction 5. If the offer is accepted and the advance is paid, the works will follow in the agreed term 6. Pre-preparation counseling - If you have "your local" builder, we would talk to them and do a detailed project 7. Installation / construction - after the preparatory works follows the installation of the pool and equipment that lasts 3-7 working days (without rain and weather) 8. Painting and summer can begin
If you can't decide where and how to position the pool in the yard, here are some useful tips: ** measure the yard and position and visualize the required pool in relation to the surface - take into account that the dimensions are stated on the site - m "internal" pool measures • if a pool is being built near a fence or wall - we recommend that the edge of the pool itself be at least 50 cm away so that there is enough space to pass. the machine part should be UP to 10m away from the pool • we do not recommend the shaft for practical reasons concerning the operation and operation of the pump and device, but finished something can all be installed either in a nearby building or we can set up a house made bass for for this purpose • the “beach” should be at least 2.2m long so that sun loungers can be set up • for hygienic reasons (solar) the shower should be ontirati near the pool
Some of the tips for deciding where to locate a pool in the yard: -if building a pool near a fence or wall -we recommend that the edge of the pool be at least 50cm away so that there is enough space to pass -if the soil is suitable for rain the pool should be off the ground "Raised" some 10-20cm - filter substation, ie the machine part should be UP to 10m away from the pool - we do not recommend the shaft for practical reasons concerning the handling and operation of the pump and device - the "beach" should be at least 2.2m long so that sun loungers can be placed - for hygienic reasons a solar shower should be installed near the pool
The foil lined pool does not look delightfully luxurious exclusive! We believe you've heard this comment before, so let's just talk about it a little bit. there are about 20 standard boxes and patterns. There are monochromatic ones and "print" ones - what would be called a "mosaic" of different colors. After this, we decided to introduce you some of the latest in this field of work, which is a new series of Renolit films called TOUCH. This foil is monochrome and thicker than standard and has some degree of "contour". It comes in several shades and it is very characteristic that after filling the pool with water this film gets its full gloss. Since all the pictures on the site are the work of our hands, this time we will make an exception so that you can see the appearance of such projects. We present the appearance of already installed pools by our colleague.
We are(not) an online shop! SATISFIED CUSTOMER IS OUR FIRST PLACE! How to achieve this in this business? Trying to keep up with the world trends concerning the virtual world, Our business is visible on various (social) media. But that still means that we can mount pools through the Internet! Namely, many are opting for such ventures in their directing and we hope that they succeed in doing so. If you are already a user / owner of the pool - we are unselfishly trying to upload tried-and-true tips from some of our experience, all in order to help you enjoy the better conditions of your pool. Now we come to the main theme,
WE ARE NOT A CLASSICAL ONLINE SHOP and
building a swimming pool (still) is not possible with virtual tools.
Our main reason and motive is a SATISFIED BUYER, a customer who, after properly installed high-quality equipment, will be able to enjoy his or her pool for one or two decades. In order to achieve this, we are here to give all that is necessary for us to achieve it because it is also for us to get the right service / product for your (not so small) money.
Why is this pool specific? One of the pools we built a few years ago that is not much different from other pools in terms of shape and dimensions. Yes, it has all the accessories for hygiene and water heating, but there is one more thing just in this pool. as a “platform”, where sunbathing is left behind. At this step, the client chose for aesthetic and practical reasons. - We think of aesthetics because it fits better in the rest of the yard - Practical because due to certain slopes in the yard, rain will not pour into the pool. This method has proven to be a great advantage when considering the environmental and weather impacts on the pool and water hygiene.
Unusual shapes! You will notice that in our portfolio you have not encountered pools of too unusual shapes, dimensions, etc. Why is that? Definitely the reason is that we cannot perform these forms - on the contrary. We have described in a lot of texts the unlimited possibilities of creating a pool with the help of styropool blocks (and in other ways). possible way for their money they get the real usable value of the product. That is to say, “I can do my money for my money!” Which is an absolutely justifiable attitude and we act in accordance with that attitude and behave towards customers / clients. The pool should have its own property and purpose known to the client and in this regard we create an offer regarding the dimensions of the pool as well as the equipment for which it decides. We have made certain recommendations (with prices of course) for specific requirements and you can see them by clicking on the link . This serves as a guide through what we can and what is recommended for specific purposes, and of course - we are ready that if you have specific requirements, we are here to accept the challenge.
Responsibility above all, to others - to yourself! The world population and the public are already aware of this unprecedented rate of spread of the coma virus We, as individuals, whether as family people, members of an organization, team within a company or members of any group, are obliged to do everything in our power to prevent the spread of the virus to a minimum. we should always believe in logic, experts, and nature - yes. Accordingly, we as individuals who are well below the age of 65 should stick to the following measures: -Disinfection and enhanced body hygiene -wearing masks and gloves - maintaining the prescribed distance -the statutory norms / standards As a member of the community and the society we work in, although we do a lot of our work outdoors, we will strive and strive to meet our loyal and potential clients as much as possible in order to overcome this great challenge we face together.
In addition to relaxation in the pool, a possible reason for your purchase may be recreation or an active sports massage in the pool. For this reason, Badu Jet is one of the most popular accessories segments purchased by clients around the world. and positioned ideally in relation to the range of motion in the recreation. The said device also exists in the superstructure variant, which means that goats and subsequently buy / mount on already existing pools. . pool needs and facilities.
One somewhat thankless topic to write about. Namely, depending on the quality and method of work on the initial construction of the pool, as well as the longevity of the mounted / installed swimming pool elements, like any other product, after a while they will wear off. If the pool is concrete and tiled, it may happen that the tiles start to fall off, so the client decides to replace the tile with the intention of installing (mo) foil. In these situations, it should be borne in mind that the foil is varied on the spot and does not present a problem with regard to the installation on various shapes and dimensions of the pool. However, when changing the lining, the elements in the pool should be changed as there are types of elements used for different lining. When coating the foil we use is 1.5mm thick and comes in a variety of colors and patterns. And recently we offer in more exclusive foils with a certain contour so that even the most demanding customers can find a solution for their pool.
In order for water to always be of good quality and safe for bathing, it must have a certain pH value. we have a pH expert device for controlling and then dosing minimal chemistry to achieve the perfect pH value of water.
As we all know, manual water treatment and maintaining water quality can sometimes require extra time. Also, due to climate change, frequent rainfall and inclement weather, the pool water is not always clean and ready for bathing. This is just one of the reasons why products that automatically maintain water quality are made. This process involves checking the current state of the water and then dosing the chemistry to bring the quality to the highest level. Two components make automatic water maintenance, namely: -electrolysis (salt water) -pH expert
As we all know, manual water treatment and maintaining water quality can sometimes require extra time. Also, due to climate change, frequent rainfall and inclement weather, the pool water is not always clean and ready for bathing. These are just one of the reasons why products that automatically maintain water quality are made. This process involves checking the current state of the water and then dosing the chemistry to bring the quality to the highest level. Two components make automatic water maintenance, namely: -electrolysis (salt water) -pH expert This method of water maintenance is very useful for both private pools (especially families with children) and commercial swimming pools because of the constant water quality, which greatly improves the customer experience of the catering facility! Chlorine as the best water disinfectant has long been used in the swimming pool industry, but the problem is that if high concentrations of chlorine can lead to health hazards. Thus, chlorine dispensers are created in order to cancel the harmful effects of chlorine, more precisely the required doses are minimized, which is very important for the health and safety of bathers.
Due to the quality of construction and application of new technologies and materials, it is possible to install and build a swimming pool in various locations. If the pool is being built on a building or similar object, additional design and design in terms of the statics of the building itself is required in order to use the space on the building in the safest possible way. The process of building and assembling the pool does not differ much from the setting on the ground.
When closing the skimmer pool, the water must be drained to a level below the skimmer and then properly treated with chemistry , because the water will remain in the pool during the winter period and in order to be correct after opening. After that it is necessary to check the installation and empty it, ie to drain the water so that it does not freeze during the winter and this ice damages the installation itself and the pipes. It is also necessary to properly cover the pool with a peb blanket, which must be fastened to the area around the pool, but float the blanket over water so as not to rupture due to precipitation
After winter canning in skimmer pools, water is only discharged to the bottom of the installation ie the skimmer and as such it needs to be properly and properly treated with chemistry to bring it to the correct pH state of the water value. After removing from the surface of the pool and water, the blanket should be cleaned / washed and dried and then folded and stored in a dry place (pantry). All installation should be inspected, which includes inspection of the appliance / pump and pipes. Pipes need to be checked for the reason that if poor canning is done, pipe bursting may occur which can cause major breakdowns during the season. Pump and mix sand or shred (every two years) and check all functions for operation. Water should be treated with chemistry and replenished. Check accessories (nets, cleaners) and put them into use. After these activities, the pool should be ready for the upcoming season.
If there are trees or similar trees in the immediate vicinity of the pool or even above the pool, the leaves often fall due to weather or season. Falling into the water can lead to dirt or even change in water quality. as such, they are required to clean and remove dirt from the water in a timely manner using manual or automatic cleaners . If these processes occur more frequently, adequate water and chemistry should be used.
Heating in de or so-called reheating water is used for extension and better use of the pool for up to two months more during the year. Also, controlling the water temperature greatly reduces the risk of colds and thus allows parents with children less stress and the risk of childhood illnesses from bathing. There are heating appliances that function independently of the heating in the house, they are very easy to install (on an existing installation), they are beautiful in design and, most importantly, easy to use. you want the pool to have water and he maintains it during runtime. The optimum water temperature in swimming pools is about 25º C. For family swimming pools, the purpose of which is not for sports but for recreation, therefore insufficient. The optimum water temperature should be around 28º C in the family pools. The cost of heating the water in the pool depends on the mode of heating. The simplest way to warm up and maintain the water temperature in the pool is to use ISO solar covers or thermal covers. Swimming pools that are covered with a solar cover can raise the water temperature up to several degrees. And, during the night, as insulators, they prevent the warmed water from cooling. Sometimes, depending on the volume of the pool, it is also necessary to warm up the water, especially in the transitional periods (May / June and September). Ways to heat water in swimming pools: 2. POOL HEAT PUMPS Advantages: * a good alternative to solar heating systems, as they produce the most heat energy with the best ratio of energy consumed; * are simply installed in existing pools
When using the swimming pool, or more accurately bathing, the water temperature has always been an important element, whether it is the beginning, the flow or the end of summer. External air temperature also dictates the water temperature, so this is one of the factors that cannot be directly affected. For this reason, heat pumps have been constructed that water to the set temperature and then keep it at the same (set) level. There are many different types of pumps, of which there is only one "air - water" where at temperatures above 8 degrees (some even operate at -12 degrees) the air can heat / maintain the water at a set temperature. This pump functions as a separate unit, neglecting heating in the building or the like. Mounted near the pool, it is beautiful in design and quiet. Of course, heaters that directly or indirectly connect to home heating achieve the same effect, but the principle of installation and operation is different. These are so-called heat exchangers and the type depends on the home heating, mainly and already existing. The differences between the two appliances are that the heat pumps independently heat the water (HAVE their own heat source) and mix with the pool water, while the heat exchangers do NOT have their own heat source but already use the existing (domestic) heat source and thus heat the water. For one of the biggest advantages, the above mentioned pool additions have the extension of the season when ie. at the beginning or end of summer when the weather is variable during those summer days.
increasingly popular method of treating water is the so-called water treatment. salt water. It is often thought that tastes like seawater and / or that iodized salt is used for this purpose. But the truth is a little different. It is a method of disinfection of water and protection against algae and bacteria, which offers many benefits such as: protection of children and adults against microorganisms, soft and pleasant salt water without fear of chlorine overdose. In this case, a high purity, non-iodized tablet is used in doses of 4kg / m3.
Various chlorine or salt based water disinfectants can be found on the market. Mention should be made of multifunctional tablets containing chlorine and algicide together. They are placed in a filter or float to keep in contact with water. If water is not controlled, it is most likely that the pH is disturbed after the rain or the algicide disappears and the algae multiply. It is best to use the Automatic control of Chlorine and Ph values of water in the pool. Convenient and untested agents should be avoided to maintain water quality, since all chemicals used for disinfection are strong poisons, including chlorine, and the handling of tablets or granules should be taken very seriously. It is caused by a large number of algae and bacteria, which is a product of deficiency chlorine. It is solved by shock chlorination with double dose of chlorine in comparison with standard chlorine, it is necessary to regulate the pH value of water. White water Occurs due to sudden changes in water temperature and acidic weather. Flocculant must be poured.
Electrolysis is something that is still very unknown in our market, so the application of "salt water" in the pool is a mystery in this type of business. Below, we briefly describe what this is and what the benefits of this water maintenance technique are. Chlorine as the best water disinfectant has long been used in the swimming pool industry, but there is a problem - if high concentrations of chlorine can lead to health hazards. Thus, automatic chlorine dosing machines are created in order to cancel the harmful effects of chlorine, more precisely the required doses have been minimized, which is very important for the health and safety of users. Namely, it is the removal of chlorine from the pool salt, after which the produced chlorine is automatically added to the ideal scale in order to have the highest possible quality water with the lowest chemistry present. This method of water treatment achieves a high degree of user awareness and health as the percentage of chemistry is automatically controlled and kept to the necessary and safe minimum.
If treated properly , complete water change in the case of skimmer pools is made every 5-7 years. Each time the pool is closed and canned, the water is drained to a level below the skimmer and treated before just covering the pool and as such is protected from external influences during that winter. After opening and at the beginning of the season, the pool needs to be replenished with new water for the level discharged before closing and the water should be re-treated with chemistry and adjusted to the required pH value in order to be ready for use.
Styropool is a revolution in the swimming pool industry. Namely, these are special blocks made from a mix of materials.It is manufactured in Germany by the highest standards and this product is patented. and the size of the pool, the economy and speed of the pool construction. The assembly process consists of assembling and joining blocks that are then filled with reinforcement and concrete. This combination results in a pool wall that is resistant to a wide variety of weather and soil conditions. An essential item is durability because from our experience the pools made in this way last more than 15 years without any need for renovation.
The installation of the pool itself takes a short period of 3-7 working days maximum if our installers come to properly prepared terrain. Installation involves the installation of a steel or styropool wall of the pool, thermophilic and liner (which requires the most time because it depends on the outside temperature, ie weather) Setting of standard equipment including pump, filter substation, skimmer, ladder, nozzle..
These pools are characterized by the type of material used to make the walls of the pool. The material we use is 0.8 mm thick steel sheet. and durability. Both types of pools come in standard dimensions and in two depth options (1.2m and 1.5m). Oval pools can be 5x3m to 12x6m in diameter, while round ones range from 3m to 7m in diameter. all depending on customer requirements and / or terrain.
There are several "divisions" or "difference" event between skimerskih and overflow basins of which we will mention some: -Ekonomičnost- hydromassage pools are cheaper by 30% of the overflow, because the overflow is required making the overflow channel and the overflow suda.Prelivni court used as a warehouse for the water from the pool in which comes from what goes depending on the number of people in the pool -Namena- Family pools or pools for small hotels are mainly skimers because they are for private use, the number of customers generally the same or at least approximately the same. Public and commercial pools are generally made as overflows because it is difficult to predict the number of bathers that will be present in the water at the same time.
When it comes to building a pool, people often create confusion about what it's really about. Many people think that the process itself is simple in the sense of just making a "when" into which water is poured and that's it. it consists of two parts: TERRACE PREPARATION: the initial part is the preparation of the terrain itself prior to installation (excavation, concrete slab flooring ...).
The installation of the pool itself takes a short period of 3-7 working days maximum if our installers come to properly prepared terrain. Installation involves the installation of a steel or styropool wall of the pool, thermophilic and liner (which requires the most time because it depends on the outside temperature, ie weather) Setting of standard equipment including pump, filter substation, skimmer, ladder, nozzle.
In addition to swimming pools, an important segment in relaxation is the sauna. Just a few minutes in the sauna is enough to regenerate your skin, improve circulation and speed up metabolism. An abrupt change in hot air and cold shower activates endorphin, a hormone that fosters a sense of pleasure and well-being. Frequent stay in the sauna has a positive effect on the vitality and resistance to colds and diseases. It relieves fatigue and tension, and promotes the elimination of excess water from the body. The saunas in our range are made of the highest quality materials and are the product of the world-renowned Astral brand.
Colder days are coming and the need for "warmer" types of relaxation is increasing. This type, when found, has been used in both private and commercial establishments (hotels, spas, cottages). "Superstructure" types of these when in commercial buildings the most represented are "recessed" types of the same.However, this does not have to be a rule, since it is important that when it fits into the whole concept of your wishes and needs.How would you complete your space for relaxation our company has provided jacuzzi tubs of the highest quality with the trademark of the world-famous and recognized brand Astral. Also, as well as all products from our astortimab, these tubs have a guarantee on their functioning and durability.
One of the common questions / concerns before or when deciding to buy a pool. First, it is necessary to define the purpose for which the client wants to decide: Is it for recreation or relaxation?
If strictly recreation is at stake then our recommendation is a rectangular pool with a Badu Jet swimming apparatus. However, then it is necessary to define how many persons at one time would be permeable to the relaxation / jacuzzi section in order to predict the number of nozzles to be placed and where. additional pump and installation required.
Therefore, if you own or would like to become a pool owner, one of the main concerns is how to keep the water temperature at a satisfactory level. They are intended for the same purpose. They are mounted on a nearby wall, use electricity, are quiet and beautiful in design. They are very easy to use, small, and allow customers to use the pool without interruption for a long period of time during the season.
You are probably wondering why to buy something like this this winter, right? The "first" is contradictory, but when we delve a little into the subject it becomes logical. Namely, the construction of the pool requires a certain period of time, which you will agree, you do not want to spend in your yard during the summer days. Summer days by themselves are a time of vacation and as such should not be spent in preparatory work / "yard work" but in enjoyment and relaxation. Also, by buying out of season the client is able to buy a pool for next season at this year's prices and thus save. After all, every client strives to get the best possible solution for their money, and we are here to help and give you hopefully a quality and practical suggestion.
The preparation of the terrain precedes the installation and is one of the most important factors affecting the final result and quality of the project. Depending on the type, size and shape of the pool, the duration of the preparation may be about a week. terrain, so excavators for mechanical excavation or excavation can be used for this purpose. The preparation of the terrain itself includes excavation and soil ratio and concrete slab flooring. The floor slab is concreted with single reinforced concrete 15-20 cm thick. and the flat sides of the wall pools masonry slag block. All processes are done according to detailed specifications and supervision to ensure the desired quality of workmanship.
Two phases of construction during the autumn period! If you are already at some stage of construction of the house or any type of building and even the landscaping of the yard - it is possible to use this time period to start the construction of the pool in terms of excavation and concrete floor slabs / installation of pool walls, and even installation of the installation. If the weather conditions do not allow continuation, after the above works the construction would stop, so that the client could continue with the rest of the construction of the building and the yard. By the time the works are completed - the pool could be completed shortly as only the foil and installation setup would remain. A process organized in this way would result in a client being welcomed in a conveniently completed facility in the spring.
Proof that even in the colder weather in our industry, something can be done :) Basically, although it is almost winter and even calendar - we have completed the complete installation of this type of swimming pool in Novi Sad. and the setting of the edge stone, we filled it with water to test the complete installation, followed by the “canning” of the pool for the winter. 1. The client will have a pool for next season at this year's price 2. The sunny days in his yard are welcomed by the client with a "ready" pool for use and thus have time to use the days for enjoyment rather than "waiting" for the works to be completed. 3.If shopping is done this year - we can schedule an assembly timer "with the first signs of spring" :))
We often come across objects that have a small or limited space that should be used in the best and most practical way so as not to endanger the rest of the yard provided for greenery. Accordingly, in our offer there are a large number of pool dimensions that can fit and make a functional The space used in this way allows the client to enjoy their home and yard without any problems.
The "first" is contradictory, but when we delve a little into the subject it becomes logical. Namely, the construction of the pool requires a certain period of time, which you will agree, you do not want to spend in your yard during the summer days. Summer days by themselves are a time of holidays and as such should not be spent in preparatory work / "yard" works "are already enjoying and relaxing. Also, by buying out of season the client is able to buy a pool for next season at this year's prices and thus save. After all, every client strives to get the best possible solution for their money, and we we are here to help and to give you hopefully a quality and practical suggestion.
These are not pools that are purchased for one or two seasons. The installation and equipment we install is of the highest quality and well-known world of the Zodiac brand, so the durability is the same for many years.
Oval pools are one of the solutions for family use. The associations are made of rectangular and pools with sharp edges. 150cm. Dimensions range from 5x3m to 12x6m. Another technique we use is to create pool walls made of styropool blocks that allow you to create pools of all shapes and sizes .
However, water maintenance must be in accordance with some rules and may be manual or automatic - there are new technologies that control and dispense chemicals to keep the water quality at a high level.
The color that is most common in this type of pool is Adria Blue. There are a large number of sides and foil patterns in the thickness of 0.8mm-1.5mm. The foil we use is formed in two layers and is UV-resistant. It is important to note that this foil has many advantages over ceramics such as: -ekomoicnost -Durability -the absence of joints and therefore no algae are created on the pool wall - Fast and easy installation / replacement - a large number of colors and patterns - no additional waterproofing required You can see more about it on story highlights or on our website
We have already mentioned the topic of "location" in terms of positioning the pool in relation to the house.Often you can see the pools on different grounds in cottages, houses-hotels and even ethno villages. the point from which the upper edge of the pool will move and accordingly, further preparation of the terrain-excavation and embankment was done. While working on a residential and / or commercial building, the pool must be envisaged in the project prior to the construction of the facility and complete static calculations for the building there would be no subsequent problems
As we have a lot of different houses, so there are a lot of different yards-locations and soil configurations. .The issue of the beach and the terrace around the pool should also be kept in mind. Practically speaking, the pool should be located in the part of the yard where the user would feel most comfortable, so if it is a private house, the client generally chooses to be "behind" it would not be disturbed by street noise or other factors. It is important that the pool is at least 0.5 meters away from the fence / wall of the yard so that space can be used for passage if the client chooses to manually clean the pool. Of course, there are other factors such as surrounding landscaping, etc
Founded in 1988, Alfa doo is one of the first specialized companies in the region to build swimming pools and install, maintain swimming pool equipment and equipment.
Based on years of experience in the design, construction and maintenance of swimming pools we offer solutions for both public and private indoor and outdoor facilities, as evidenced by a long tradition and guarantee.
An additional guarantee of our quality is the support of strategic partners who are leading global brands in this industry.
From conceptual design or offer to the very completion of works, we always put quality and precision first, both in the process and after the process in the form of agreements and advice, with the aim of making it as easy as possible for you to enjoy all the benefits of our products.
The ultimate goal is to continue the cooperation after the completion of the work for mutual satisfaction.